FORMING
For thermal treatment of glass and quartz glass
For the production of standard ground joints, ball joints, stop cock barrels, glass threads and flanges as well as execution of various serial works. According to the machine model, tube ends up to 200 mm diameter can be formed.
Advantages: computer controlled operating sequence, easy programming, high accuracy by means of fine adjustment of forming tools and thus constant, close tolerances and low grinding times and handling of the machine by semi-skilled personnel or in a further step by industrial robots.
48/06 – 48/012
Single spindle – glass forming machine
manual operation
Machine for production of standard ground joints, ball joints, stop cock barrels, glass threads and flanges, forming of outer joints at flasks, according to machine type suitable for the forming of tube ends made of borosilicate glass up to 120 mm diameter.
Advantages:
■ High forming accuracy due to precise adjustment of forming
tools and thus constant, close tolerances and short grinding
periods
■ Machines can be operated by semi-skilled staff
■ Also suitable for small series
54/06 – 54/012
One spindle – glass forming machine
semi-automatic
The machine is for production of standard and serial articles, especially for standard ground joints, ball joints, stop cock barrels, glass threads and flanges, forming of standard ground female joints on flasks, depending on the machine model, suitable for forming tube ends of borosilicate glass up to a dia. of 120 mm.
Advantages:
■ PLC controlled operation cycles – easily programmable,
depending on the execution diff erent programs can be stored
at the control unit
■ connection of modem for remote control poss ible
■ high capacity, high accurac y by means of f ined adjustment of
forming tools and thus constantly, close tolerances and low
grinding times
■ handling of machine by semiskilled personnel, whereby one
person can handle two or three machines, depending on
operation hours of program
■ applicat ion of oil- or air-cooled tools is possible.
54/50
Glass forming machine, rotary type –
semi-automatic
Production of:
■ Standard ground male joints NS 10 – 45
■ Standard ground male joints with tip NS 14,5 – NS 45
■ Standard ground female joints NS 10 – 45
■ Standard ground female joints at round bottomed flasks and
Erlenmeyer flasks NS 10 – NS 29
■ Standard ground male ball joints and standard ground female
ball joints from KS 13/5 – KS 34/20
■ Glass external threads GL 14 – GL 45
■ Flanges up to NW 25
Advantages:
■ PLC controlled working process , easily programmable, stored
programs are called in via touch control
■ high capacity, import accuracy by fine adjustment of forming
tools, thus constant, tight tolerances and low grinding times
■ tool operation pneumatically, (motorized as an option) with
oil-retarding process in working range
■ automatic compensation of length, thus constant glass
quantities for forming process
■ operation of the machine by semiskilled staff
