LATHES

For the thermal treatment of glass and quartz glass

Our lathes are used in the laboratory glass production and electronics industry, for delicate joining, forming and sealing works, in the quartz glass industry for outside calibration of heavy, long tubes as well as for joining and reshaping operations with specific appliance and machine equipment and in the fibre industry with specific machine concepts for particular process steps.

 

The machines excel by a sophisticated, modern and sturdy construction, absolute reliablility and high precision. Hardened and ground and therefore wearresistant dual round bar guide bed in combination with a throughout machined base.

A closed stainless steel cover protects the bed against heat radiation and soiling. Modern components guarantee an axial exactness and a playfree running of the machine concepted for use over decades. The main drive of machine grants even in the lower range of speed an exact control of spindle rotation. It is characterized by a high and steady torque. The right working head can be separated from drive by clutch.
The right working head and the burner support are guided on precision linear ball bearings. This technical complex construction guarantees the so important wear-reduced running during the continuous oscillating working method.


For our standard machine control systems – conventional relay control, PLC or industrial panel PC- we offer according to the customers’ requirements the suitable applications.

Lathes Catalogue

The entire portfolio can be found clearly and in detail in our PDF catalog.

36 pages,

Mehr anzeigen

Benchtop models

This product range is designed for small and smallest work piece diameters.
The extensive accessories program allows to up-grade some machine types for the fully automatised operation via industrial panel PC with up to 20 motorical axes for various forming tools and burner combinations.

 

Floor models

This product line with 80 to 1000 mm spindle bore is preferably used for the quartz glass processing.

Depending on the desired application – “fabricating” or “resizing” – the machines are equipped with the corresponding burner and tool equipment. Center height and machine length are also customized realized.

Vertical machines

 

The standard delivery program includes machines with a spindle bore of 60 mm up to 260 mm with an overall height of over 9 meters in the large series. Depending upon the application – laboratory glass, quartz glass or fibre industry – machines could be completed with appropriate equipment.

Swivel-type machines

These machines are suitable for special operation and process steps. Without re-clamping the workpieces these steps could thus be accomplished horizontally and/ or vertically.

  MACHINES

 

1060 F –1080 H

Universal - Glassworking lathes
Series „Assistant“ –Table models

The precision machines for a versatile and demanding application for instance for joining electrodes, for producing bulbs from quartz, for glass-metal-seals and generally for streamlining a lot of operations when working on glass and quartz.

Also available with electrically adjustable machine frame.

3080 - 3100

Universal –Glassworking lathes,

small series „Standard” for horizontal operation

The machines excel by a sophisticated, modern and sturdy construction, absolute reliablility and high precision. Hardened and ground and therefore wearresistant dual round bar guide bed in combination with a throughout machined base. A closed stainless steel cover protects the bed against heat radiation and soiling. Modern components guarantee an axial exactness and a playfree running of the machine concepted for use over decades. The main drive of machine grants even in the lower range of speed an exact control of spindle rotation. It is characterized by a high and steady torque. The right working head can be separated from drive by clutch.
The right working head and the burner support are guided on precision linear ball bearings. This technical complex construction guarantees the so important wear-reduced running during the continuous oscillating working method.

3260 - 3600
 

Universal – glassworking lathes,
heavy series „Standard“ for horizontal operation

The machines excel by a sophisticated, modern and sturdy construction, absolute reliability and high precision. Hardened and ground and therefore wearresistant dual round bar guide bed in combination with a throughout machined base. A closed stainless steel cover protects the bed against heat radiation and soiling. Modern components guarantee an axial exactness and a play free running of the machine concepted for use over decades.
The main drive of machine grants even in the lower range of speed an exact control of spindle rotation. It is characterized by a high and steady torque. The right working head can be separated from drive
by clutch. Working spindles have plane flanges on both sides to accept chucks on the outer flanges as well. Power transfer to the working spindles via easily adjustable double roller chains. 

 

Thomas Seyffert
Technical Sales


thomas.seyffert@
arnold-gruppe.de


06471-9394-27

Jochen Schuler
Technical Sales

jochen.schuler@

arnold-gruppe.de

06471-9394-744